Green Powdercoated Steel Palisade Fencing

Green Powdercoated Steel Palisade Fence


A strong and durable construction providing excellent protection against climbing and cut-through, palisade fencing is a cost effective way to providing a high level of security to the boundary line of any property. Palisade is a very popular choice of fencing in commercial applications, industrial units and schools throughout  the UK. The reason behind this popularity is due to the  simple yet robust design of steel palisade fencing. This makes palisade fencing both highly vandal resistant and difficult to damage. Due to the sharp options available of the steel palisade palings it can be extremely difficult to climb. Both cost effective an d secure, steel palisade fencing is a good all round security fencing system.


Palisade fencing is designed to be a strong and durable construction and Premier Palisade fencing provides excellent protection against climbing and cut-through. Palisade fencing is available with either a ‘D’ or a ‘W’ pale profile to varying specifications including specials for Gas, Water & Electric Companies, and the Public Sector. All of the palisade fencing supplied by Premier Fencing is designed to comply with BS 1722 Part 12, plus, contact us for information on the ULTIMATE STEEL PALISADE FENCE.

Steel Palisade Fencing - D Pale

Steel Palisade Fence – D Pale Triple Point

Stronguard - The ultimate Steel Palisade Fence

Contact us for The Ultimate Steel Palisade Fence

Heights Available for Steel Palisade Fencing

1.2m, 1.5m, 1.8m, 2m, 2.1m, 2.4m and 3m heights are available. Plus, heights of 3.6m and greater are available on special request

steel palisade paling tops

Paling Tops for Steel Palisade – available for ‘D’ and ‘W’ Pales


Paling tops

Can be single pointed, triple pointed, square tops or round and notched tops.

Grey Powdercoated Steel Palisade Fencing

Steel Palisade Fence – Grey Powdercoated

Steel Palisade Fencing Hot Dip Galvanised

Steel Palisade Fence – Hot Dip Galvanised





Available in 4 standard sizes according to height and site requirements: 40×40, 45×45, 50×50 and 65×50.


Available with welded fish plates or slotted, complete with loose fish plates that can be concreted-in, base plated for bolting down or cranked. Posts can be vertically extended to take barbed or razor wire.Posts are generally 102 x 44mm RSJ (or 100×55), increasing to 127 x 76mm, recommended for fences above 2.7m.

Typical 2m high steel palisade fencing - technical

Typical 2m high steel palisade fence





Standard panel sizes of 2750mm (post centres) are freely available at short notice from Steel Palisade manufacturer’s stock of all standard heights.  Panels can be easily raked to allow for most site conditions.


All fixings are anti-vandal and are generally supplied hot dip galvanised.




Advantages of W Pale Palisade Fencing

While D section palisade fencing provides effective medium level of security, a W section steel  palisade fence provides more protection and offers an even greater resistance to attack. This is due to the simple nature of how the profile interacts with the horizontal rail, as shown below:
steel palisade pale profiles

D Pale Vs W Pale



D Pales—Available in 2.5mm, 3mm and 3.5mm

Use longer bolts , with bolt heads that may be exposed to attack. Plus there is flexibility between the pale fixing and the horizontal rail.


W Pales— Available in 2mm, 2.5mm and 3mm.

Use shorter  bolts and the pale sits flush against the horizontal rail. No flexibility provides a more secure fixing.




Basic Specifications of Palisade Fencing

Two horizontal rails are used as standard for palisade fences up to 3m in height. Additional rails can be fitted onto fences of any height, but above 3m high, this will be necessary to ensure the integrity of the fence. The 3rd rail is usually fixed at the bottom of the fence to provide the additional rigidity, without providing a climbing option.

Triple pointed security pales are usually supplied as standard above 1.8m high, depending on the specific requirements, and safe notched and rounded tops are standard below that height and for schools and other applications where security needs to be tempered with safety concerns. The other profiles are available upon request.


Steel Palisade Fencing is available in self-colour, hot dip galvanaised or hot dip galvanised and polyester powder coated to any standard RAL colour. Generally available in RAL 6005 Green, RAL 9005 Black and RAL 5010 Blue.


Standard gates are available or tailored-made to suit your requirements. All gates are supplied with rear hung adjustable hinges, pad-lockable drop-bolts, multi-holed to suit site conditions.


Contact Us :  Tel 01934 733 380  |   Fax 01934 733 398  |